Eclipse Surveillance offers a large number of access control accessories and integrated IP-based electronic access control (EAC) solutions from access control systems, door controllers and card readers, to servers, proximity cards and access control software. When you integrate Access Control Proximity Card Readers and Electronic Door Locks with your CCTV Camera System, you will have enhanced your security substantially.
Access Control
Sub-Categories
-
Readers
-
Maglocks
-
Door Strikes
-
Cards & Fobs
-
Exit Buttons
-
Electric Door Hardware
-
Control Panels
-
Access Power Supplies
-
Biometric Readers
-
Video Intercoms
-
Request to Exit PIRsRequest to exit PIRs for access control
-
Smart Residential Doorlocks
ECL-ACC1000 Access Network Control Panel
(1)
In Stock.
This maglock runs on 12VDC or 24VDC and leaves no residual voltage when turned off.
(0)
In Stock.
This maglock runs on 12VDC or 24VDC and leaves no residual voltage when turned off.
(0)
In Stock.
This magnetic lock is suitable for most doors.
(0)
In Stock.
This magnetic lock is suitable for most doors.
(0)
In Stock.
ECL-ACC270 928MHz proximity card & sticker for vehicles
(0)
In Stock.
KAD-RXC SMART DEADBOLT LOCK
(0)
In Stock.
KAD-RXD SMART LEVER DOOR LOCK
(0)
In Stock.
ECL-IPV200 - Outdoor Video Doorphone Entry Unit
(0)
Add to wish list
ECL-IPV800 - Apartment Building Video Doorphone Entry Unit
(0)
Add to wish list
ECL-IPV200 7" Indoor Video Intercom Monitor.
(0)
Add to wish list
ECL-ACC140 Electric Door Strike
(0)
In Stock.
When a "fail-secure" electric door lock looses power its default position is to lock (or secure) the door.
(1)
Out of Stock.
This aluminum bracket set is designed for use with ECL-ACC500 maglocks. It contains a set of three brackets plus hardware and installation template for drilling.
(0)
Out of Stock.
This aluminum bracket set is designed for use with ECL-ACC500 maglocks. It contains a set of three brackets plus hardware and installation template for drilling.
(0)
In Stock.
This aluminum bracket set is designed for use with ECL-ACC300 maglocks.
(0)
Out of Stock.
This spacer is specifically designed to work perfectly with our 600lb maglock, ECL-ACC300
(0)
In Stock.
QR Code Scanning Access Control Reader This indoor access control reader uses QR Code technology to provides a contact-less solution. Ideal for applications where mitigating the spread of germs is required.
(0)
In Stock.
Touch-less Access Control Reader This outdoor/indoor access control reader uses QR Code technology to provides a contact-less solution. Ideal for applications where mitigating the spread of germs is required.
(0)
In Stock.
ECL-ACC440IR Touch-less Infrared Sensor Exit Button
(0)
In Stock.
No Contact Exit Button This exit button can be used in deployments looking for a contactless solution. It's elegant design and reliable functionality make it a great choice for medical, food, or any other industry where the spread of germs needs to be mitigated.
(0)
In Stock.
ECL-ACC850 Smart WIFI Fingerprint Access Control Reader
(0)
Not for Sale.
This aluminum bracket set is designed for use with ECL-ACC300 maglocks.
(0)
In Stock.
ECL-ACC91W This outdoor access control reader can be used in network mode and supports access via proximity cards. Can be managed via Eclipse access control client software or our ECL-ACC1000 Network Control Panel.
(0)
In Stock.
ECL-ACC980IP Multi-Mode Access Control Reader
(0)
In Stock.
ECL-ACC898 Multi-Mode Access Control Reader
(0)
In Stock.
ECL-ACC950IP Multi-Mode Access Control Reader
(0)
In Stock.
ECL-ACC430IR : Touch-less Capacitive Sensor Exit Button
(0)
Out of Stock.
_thumbnail.jpg)
ECL-ACC920 Proximity Card Access Control Reader
(0)
In Stock.
ECL-ACC998 Standalone Biometric Access Control Reader
(0)
In Stock.
ECLIPSE ECL-ACC900 Proximity Card Reader with Keypad, Buzzer & LED
(1)
In Stock.
Power supply for ACC-1000 Panel
(0)
In Stock.
Eclipse ECL-ACC999 Fingerprint & Card Reader.
(0)
In Stock.
ACC940R RELAY OUTPUT MODULE
(0)
In Stock.
ECL-ACC890K2 - KEYPAD PROGRAMMER FOR ECL-ACC898 READERS
(0)
Out of Stock.
ECL-ACC997 Biometric Access Control Reader
(0)
Out of Stock.
When a "fail-safe" electric door lock looses power its default position is to unlock the door.
(0)
In Stock.
Requires 12VDC to lock. If power is lost, the dead bolt is withdrawn so the door is unlocked.
(0)
In Stock.
forusewithecl-acc150maglocks_thumbnail.jpg)
ECL-ACC3U This aluminum bracket set (part number ECL-ACC3U) is designed for use with ECL-ACC150 maglocks.
(0)
In Stock.
This small form factor green illuminated button is mounted on a slim metal plate that can be secured to a wall near the door it effects
(0)
In Stock.
This red illuminated button is mounted on a back box that is designed to rest on the surface of the wall.
(0)
This weatherproof exit button is made of chrome acrylic material.
(0)
Not for Sale.
This weatherproof exit button is made of chrome acrylic material and incorporates a ring-shaped LED that can light in RED or BLUE mode, under control of an external door control device.
(0)
In Stock.
This red illuminated button is mounted on a metal plate that can be secured to a wall near the door it effects.
(0)
In Stock.
The ECL-ACC899 relay module accepts data from card readers and then asserts the door control hardware. It adds an extra level of security.
(0)
In Stock.
The ECL-ACC890 door controller/card reader is 2-inches wide and designed for indoor or outdoor use.
(1)
In Stock.
ECL-ACC910 This indoor proximity card reader works great and has an LED to indicate positive card read, and a buzzer.
(0)
Out of Stock.
This proximity card reader is designed for outdoor placement.
(0)
In Stock.
This advanced card reader is designed for outdoor placement and contains a door control relay.
(0)
In Stock.
This outdoor proximity card reader functions in the weather and lights up for easy operation.
(0)
In Stock.
This ISO standard proximity card is 1.8mm thick and can have printed material attached to the front.
(0)
In Stock.
This ISO standard proximity card is 0.75mm thick and can have printed material attached to the front
(1)
In Stock.
This proximity tag comes attached to a keychain and is supplied with a pre-assigned unique code.
(0)
In Stock.
This UL-listed magnetic lock is suitable for most doors.
(0)
In Stock.
This electrically activated magnetic lock operates on 12 or 24 volts DC.
(0)
In Stock.
This maglock runs on 12VDC or 24VDC and leaves no residual voltage when turned off.
(0)
In Stock.
This electrically activated magnetic lock operates on 12 or 24 volts DC
(1)
In Stock.
These aluminum brackets are predrilled and designed for use with our 300lb magnetic locks, the ECL-ACC150 series.
(0)
In Stock.
