Access Control

When a "fail-safe" electric door lock looses power its default position is to unlock the door.

Requires 12VDC to lock. If power is lost, the dead bolt is withdrawn so the door is unlocked.

ECL-ACC3U This aluminum bracket set (part number ECL-ACC3U) is designed for use with ECL-ACC150 maglocks.

This small form factor green illuminated button is mounted on a slim metal plate that can be secured to a wall near the door it effects

This red illuminated button is mounted on a back box that is designed to rest on the surface of the wall.

This weatherproof exit button is made of chrome acrylic material.

This weatherproof exit button is made of chrome acrylic material and incorporates a ring-shaped LED that can light in RED or BLUE mode, under control of an external door control device.

This red illuminated button is mounted on a metal plate that can be secured to a wall near the door it effects.

The ECL-ACC899 relay module accepts data from card readers and then asserts the door control hardware. It adds an extra level of security.

The ECL-ACC890 door controller/card reader is 2-inches wide and designed for indoor or outdoor use.

ECL-ACC910 This indoor proximity card reader works great and has an LED to indicate positive card read, and a buzzer.

This proximity card reader is designed for outdoor placement.

This advanced card reader is designed for outdoor placement and contains a door control relay.

This outdoor proximity card reader functions in the weather and lights up for easy operation.

This ISO standard proximity card is 1.8mm thick and can have printed material attached to the front.

This ISO standard proximity card is 0.75mm thick and can have printed material attached to the front

This proximity tag comes attached to a keychain and is supplied with a pre-assigned unique code.

This UL-listed magnetic lock is suitable for most doors.

This magnetic lock is suitable for most doors.

This electrically activated magnetic lock operates on 12 or 24 volts DC.

This maglock runs on 12VDC or 24VDC and leaves no residual voltage when turned off.

This electrically activated magnetic lock operates on 12 or 24 volts DC

These aluminum brackets are predrilled and designed for use with our 300lb magnetic locks, the ECL-ACC150 series.