Passive Balun with Camera Power Cable

• Compact size

• Transmits color video signals up to 400 meters (437.4 yards) or b/w video up to 600 meters (656.2 yards)

• Distances of up to 1 kilometer when used with active baluns

• Built-in noise filter

• Cost saving: No coax needed

• Category 5 (CAT 5) wire recommended

• Integrated camera power cable

• Instruction manual included

• Use with ECL-B4HPW (4 port power hub) for powering CAT 5 cables.

Be sure to check out our full range of pre-fabricated video coax cables and  network cables for almost any application, and our discreet cable/connector adapter products (available in bulk quantities) that let you design and maintain your own cables.

*Note: Typical category 5 cable uses 24 AWG (American Wire Gauge) twisted pair copper wire and is designed to safely carry 12VDC power required for most surveillance cameras when configured properly using pins 4 and 5 of the standard jack (8P8C modular connector). Always be aware of safety considerations, wire routing considerations, environmental considerations and voltage drop after 100 meters when using powered Cat 5 cable.